NYRIM® material properties
The material properties of any nylon, and thus for NYRIM®, depend on the amount of moisture that has been taken up by the product. The moisture absorption (conditioning) results in a lower modulus and higher impact resistance. Therefore the material properties are indicated usually in ‚dry as moulded’ and ‚conditioned’ state.
| Material properties dam - dry as moulded con - conditioned | N1000 | N1500 | N2000 | N4000 | N1525GF | ||
| Tensile Modulus | DIN 53457 | MPa | 2445 dam 1147 con | 2106 dam 900 con | 1512 dam 647 con | 453 dam 229 con | 3750 dam 1820 con |
| Elongation at break | DIN 53455 | % | 40 dam 250 con | 90 dam 320 con | 270 dam 400 con | 420 dam 420 con | 7 dam 30 con |
| Tensile strength at break | DIN 53455 | MPa | 58 dam 49 con | 54 dam 44 con | 47 dam 42 con | 26 dam 22 con | 55 dam 28 con |
| Notched Charpy impact at 23°C | DIN 53453 | KJ/ m2 | 16B dam 31D con | 20B dam 42D con | 22D dam 48D con | * * | 6 dam 9 con |
| Notched Charpy impact at -40°C | DIN 53453 | KJ/ m2 | 6B dam 8B con | 14B dam 15B con | 14B dam 14B con | * * | 5 dam 5 con |
| Shore D | DIN 53505 | 79 dam 74 con | 77 dam 73 con | 74 dam 66 con | 59 dam 52 con | 82 dam 72 con | |
Contact Persons
Downloads
News
