Processing auxiliaries

Processing auxiliaries and aids such as nucleating agents, lubricating and release agents with a strong focus on polyamides and polyesters.

The Bruggolen® P product line are organic and inorganic additives acting as crystallization accelerators, shortening cycle times during processing drastically and improving the mechanical properties of the finished parts via a homogeneous crystallization.

Brueggemann offers efficient combinations of internal and external lubricating and release agents based on high-grade ingredients to improve the flowability and mold release, like in filled reinforced polymers.

Bruggolen® P main benefits:

Processability

  • Improved melt flow
  • Excellent mold release
  • Improved dispersion of fillers
  • Reduction of cycle time in injection molding
  • Non to low volatility

Mechanical performances

  • High gloss and good surface protection
  • Improved dimensional stability
  • Improved tensile strength
  • Impoved stiffness, HDT...

Bruggolen® P (Processing Agents)

Nucleating Agents

Characteristics

Bruggolen® P 22

Highly efficient nucleation of polyamides

  • reduction of cycle time in injection molding
  • improved dimensional stability - significant reduction of warping in GF-reinforced polyamide
  • improved mechanical properties (tensile strength, stiffness, HDT..)
  • improved mold release
  • non-volatile; non-extractable

Bruggolen® P 250

Highly efficient nucleation of polyesters

  • reduction of cycle time in injection molding
  • improved dimensional stability
  • improved mechanical properties (tensile strength, stiffness, HDT..)
  • non-volatile; non-extractable

Lubricating / Demolding packages

Characteristics

Bruggolen® P 12

Bruggolen® P 130

Well balanced combination of internal and external lubricants especially for polyamides (P12 and P130) and polyesters (P130)

  • very low volatility
  • high gloss and good surface protection
  • improved melt flow
  • excellent mold release
  • improved dispersion of fillers

Processing One-Packs

Characteristics

Bruggolen® P 30/P31

Bruggolen® P 32/P33
Bruggolen® P 34/P35

Synergistic ready-to-use packages for injection molding grades

  • P30/P31 is specifically designed for recycling of PA fiber waste or PA regrind
  • improved melt flow
  • strongly reduced cycle time, very good mold release
  • efficient color protection / processing stabilization

Processing auxiliary for dry blending

Characteristics

Bruggolen® P 60

Improved quality of polymer chips and additive powder blends

  • reduced separation during transport
  • improved additive dispersion